Fire Equipments Maintenance – Do’s and Don’ts...

Everyone employ different ways to fight with fire. Sometimes you prefer prevention rather than fighting it. Although there are many ways to prevent this incidence from happening, fire accidents still occur. People still get hurt, lose their vital things, home or even lives in the process. Therefore, for proper fire maintenance people buy equipments to ensure that small incidences of fire will not turn out to be big one and cause massive destruction. Some people do survive with the help of these equipments.Get additional information at astoriasafetystores.

The presence of protection equipments is important in making a place fire proof. Despite the fact that is mandated by building codes and standards to be followed, people still get them for the reason of fire safety. Even people having their own homes, buy them for the reason that even at home, fire can be a big risk to take. Your gas tanks or pipelines, burners, grillers, heaters and other electrical equipments are all highly receptive to hazards. Even if, these equipments may not be used at all times, having them at place can prove to be helpful in case of fire emergencies.

There are many types of equipments that you can purchase from the market and they also have different indications. Actually, these fighting equipments are commonly referred to as fire extinguishers. With these equipments, there are certain things to keep in mind when using them. Here is the list of some do’s and don’ts:

Do’s To Follow

-Read the instruction manual carefully to understand the use of the fire safety equipment.

-Check the rating or classification of the equipment to know the type of fire it is applicable.

-Maintain a safe distance while extinguishing the flames.

-Put signs and indicators with the equipment. Make sure that they can be seen easily and are accessible.

Take proper training for handling the fire extinguisher according to the standards set by Occupational Health and Safety Administration. Also follow strict rules set -by the NFPA or standards and codes set by them for these equipments.

-Recharge the equipment after use and follow maintenance schedule.

Don’ts to Follow

-Do not use water agents or grease on oil fires or use dry chemical extinguishers to electrical devices or anything with metal because it is corrosive.

-Do not stand too close to the fire or even plan to walk on those extinguished areas.

-Try not to put them on areas where fire is most likely to happen making them unreachable.

-Do not leave them on corridors or any anything that is highly magnetic.

-Do not violate the standards because even with their presence you might still be at risk or prone to the dangers of fire.

-Avoid playing with the equipment or its substances because they may cause injury to you.